USJ Purnama Services

EOCOTE 106 HB

Substrate to be coated must be sound, clean and free from any contamination. Mechanical stone grinding should be employed followed by thorough vacuuming. Apply 2-3 coats of EPOCOTE 106 HB at a spreading rate of 6 m²/kg/coat at an interval of minimum 8 hours. All applications must be carried out in accordance with manufacturers ' written instructions.

Substrate should be structurally sound, clean, and free from loose particles, oil, grease and other contaminants . Remove cement laitance, loose particles, and other contaminants from surface by mechanical cleaning preferably stone grinding and followed by vacuuming. EPOCOTE 106 HB is a thin coating and the substrate must be fine textured after surface preparation. Any surface irregularities may show through causing excessive wear on high sports and changing the perceived color of the coating.

Stir each component separately using a slow speed (300-400 rpm) electric drill fitted with apaint mixer or a wing type mixing paddle. Then pour the entire content of Part B into Part A and continue to mix for 2-3 minutes before use.

Apply EPOCOTE 106 HB within its pot life. 1st Coat / Primer Can be thinned up to 10% Thinner # 1 to assist the priming application.

Either 1 or 2 coats of full strength or thinned up to 5% Thinner # 1 dependent on the absorbency of the substrate or the opacity of the colours.

Thinner # 1

Brush, roller (short hair mohair roller) or airless or conventional spray.

Touch Dry: 6hrs. at 25ºC Maximum Recoating Time: 24 hrs. at 25ºC

Foot Traffic - 24 hours. Full Strength - 7 days.

EPOCOTE 106 HB is self curing. The curing time depends on the ambient temperature, humidity, and the quantity mixed and placed. Under normal circumstances initial curing will take place after 8 hours.

EPOCOTE 106 HB has excellent resistance to a wide range of industrial chemicals. A few common chemicals as listed below: -

Product contain epoxy resins and amines. Do not take internally. May irritate eyes and skin. Always use with suitable protective gears. Close container tightly after use. Keep out of reach of children. For further information , refer to the product Material Safety Data Sheet, available upon request.

With a wealth of technical and practical experience built up over many years in pursuit of excellent especially in the flooring and concrete technology, make us your partner today!

Contact us at our hot line below.